Question: How Much Plasterboard Do I Need For Ceiling?

What is the standard size of plasterboard?

1200mmPlasterboard generally comes in 1200mm wide sheets, designed to suit the standard 600mm stud spacing used in housing today.

Other widths are available for specific systems for instance 900mm widths for the British Gypsum GypWall RAPID metal stud housing partition system and 600mm sheets for use where space is limited..

How much does it cost to drywall a 1000 square foot house?

Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot….Average Cost to Drywall a House by House SizeCost to Drywall a 1000 sq ft HouseTotal CostLow x 5500 square feet$7,975Average x 6325$12,100High x 7250$17,32516 more rows

How many square Metres is 5×5?

an area of 5 m2 (5 metres squared) The word square or squared refers to the units and not the shape. 5 = 25 square metres. Hi Allan.

How do you work out plasterboard coverage?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you’re using 4-by-8 sheets) or by 48 (if you’re using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

What is the best filler for plasterboard?

Ideal for filling and repairing cracks and holes in walls and ceilings. Gives a smooth finish which dries fast and can usually be over painted with emulsion based paint within minutes. After curing product can be sanded. No Nonsense Instant Plaster Filler White 310ml is rated 4.7 out of 5 by 170.

What is the best plasterboard to use in a bathroom?

“Whilst standard plasterboard is ideal for most environments, it shouldn’t be used in constantly damp conditions. For kitchens, bathrooms and similar damp areas, Gyproc Moisture Resistant should be used.

How many plasterboards do I need for my ceiling?

Diyisfun. now measure the ceiling length x breadth multiply together that will give you ceiling square feet. Divide the board size (32) into the ceiling size that gives the MINIUM number of sheets as for wastage, cant help there.

How much drywall do I need for my ceiling?

Measure the ceiling: 15 x 10 = 150 square feet. Add the areas together: 180 + 270 + 150 = 600 total square feet. Round up: 16.67 = 17 sheets. Add 2 sheets for waste: You’ll need 19 total sheets.

What thickness plasterboard should you use on a ceiling?

9.5mmReplacing old ceiling made of lath & plaster, replace it with plasterboards and then skimm over it, for both upstairs and downstairs ceilings. Now which depth should I get, some suggest 9.5mm as they’re mainly used for ceiling and the larger verison for walls, but then again others say 11.5 is now often used.

Do you plasterboard walls or ceiling first?

Doing the ceiling first means you can lift the wall sheets to make a tight joint. By contrast if you do the walls first you would have to sculpt every edge to make it seat tightly, and/or end up with lots of voids to fill before you tape.

How thick should a ceiling be?

The floor of one level of a home shares framing with the ceiling of the level below it. In a typical home, the entire structure between levels can be about 12 to 14 inches thick, depending on the type of joists used and the finish materials for the floor and ceiling.

Does it matter which way plasterboard go?

It dosn’t matter if you put the dark side inside (i.e. to the outside wall) or the outside; you won’t make a successful job because the plasterboard is not suitable for outside. Inside walls are OK, but you have to have the outside (i.e. white side) of the plasterboard outside and not against the inside wall.

How much drywall can man hang in 8 hours?

Each man should be able to hang 35 to 40 sheets an eight hour day.

How many square feet does a 5 gallon bucket of drywall mud cover?

Covers approximately 475 sq. ft.

Can I use insulated plasterboard on a ceiling?

2 Answers from MyBuilder Plasterers. Dear hoteldave, this is definitely possible, when overboarding your ceiling with insulated plasterboards, ensure you get the right fixings to fix through the insulated plasterboards and the existing ceiling into your timber ceiling joists.

How much does lumber cost per thousand?

Here’s the formula on how you calculate per piece. Step 2 – Take the price per thousand (or Per M) and divide by 1000. Step 3 – Multiply the board feet in step 1 by the answer in step 2. Your answer is $1.33 per piece (Rounded down of course).

Can you use 9.5 mm plasterboard on ceilings?

Private Member. Sorry but your wrong you should not use 9.5mm boards on ceiling work unless the joists are 300 centres. They are fine for overboarding walls though.

How many square Metres is a 4×8 sheet?

Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2.